GWR 1361 Class

Specifications
Specifications
Configuration:;
• Whyte	0-6-0ST
• UIC	C nt
Gauge	4 ft 8+1⁄2 in (1,435 mm) standard gauge
Driver dia.	3 ft 8 in (1.118 m)
Minimum curve	2 chains (132 ft; 40 m)
Wheelbase	11 ft 0 in (3.35 m)
Length	25 ft 7+1⁄2 in (7.81 m) over buffers
Width	8 ft 6 in (2.591 m)
Height	11 ft 7 in (3.531 m)
Axle load	12 long tons 0 cwt (26,900 lb or 12.2 t); (12.2 t; 13.4 short tons)
Loco weight	35 long tons 4 cwt (78,800 lb or 35.8 t); (35.8 t; 39.4 short tons) full
Fuel type	Coal
Fuel capacity	2 long tons 0 cwt (4,500 lb or 2 t); (2.0 t; 2.2 short tons)
Water cap.	800 imp gal (3,600 L; 960 US gal)
Firebox:
• Grate area	10.71 sq ft (0.995 m2)
Boiler	GWR 1392
Boiler pressure	150 lbf/in2 (1,030 kPa)
Heating surface:
• Firebox	74.75 sq ft (6.945 m2)
• Tubes	815.5 sq ft (75.76 m2)
• Total surface	890.25 sq ft (82.707 m2)
Cylinders	Two, outside
Cylinder size	16 in × 20 in (406 mm × 508 mm)

Type and origin
Type and origin
Power type	Steam
Designer	G. J. Churchward
Builder	GWR Swindon Works
Order number	Lot 179
Serial number	2375–2379
Build date	1910
Total produced	5

1361 Class
1361 Class
	1364 at Plymouth Dock in 1948
Power type
Type and origin
Power type	Steam
Designer	G. J. Churchward
Builder	GWR Swindon Works
Order number	Lot 179
Serial number	2375–2379
Build date	1910
Total produced	5
Configuration:;
Specifications
Configuration:;
• Whyte	0-6-0ST
• UIC	C nt
Gauge	4 ft 8+1⁄2 in (1,435 mm) standard gauge
Driver dia.	3 ft 8 in (1.118 m)
Minimum curve	2 chains (132 ft; 40 m)
Wheelbase	11 ft 0 in (3.35 m)
Length	25 ft 7+1⁄2 in (7.81 m) over buffers
Width	8 ft 6 in (2.591 m)
Height	11 ft 7 in (3.531 m)
Axle load	12 long tons 0 cwt (26,900 lb or 12.2 t); (12.2 t; 13.4 short tons)
Loco weight	35 long tons 4 cwt (78,800 lb or 35.8 t); (35.8 t; 39.4 short tons) full
Fuel type	Coal
Fuel capacity	2 long tons 0 cwt (4,500 lb or 2 t); (2.0 t; 2.2 short tons)
Water cap.	800 imp gal (3,600 L; 960 US gal)
Firebox:
• Grate area	10.71 sq ft (0.995 m2)
Boiler	GWR 1392
Boiler pressure	150 lbf/in2 (1,030 kPa)
Heating surface:
• Firebox	74.75 sq ft (6.945 m2)
• Tubes	815.5 sq ft (75.76 m2)
• Total surface	890.25 sq ft (82.707 m2)
Cylinders	Two, outside
Cylinder size	16 in × 20 in (406 mm × 508 mm)
Tractive effort
Performance figures
Tractive effort	14,835 lbf (65.99 kN)
Operators
Career
Operators	Great Western Railway; British Railways
Power class	Unclassed
Numbers	1361–1365
Axle load class	Unclassed
Withdrawn	1961–1962
Disposition	One preserved, remainder scrapped

The 1361 Class were small 0-6-0ST steam locomotives built by the Great Western Railway at their Swindon Works, England, mainly for shunting in docks and other sidings where track curvature was too tight for large locomotives.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.