FS Class 910

Specifications
Specifications
Configuration:;
• Whyte	2-6-2T
Gauge	1,435 mm (4 ft 8+1⁄2 in)
Leading dia.	850 mm (33 in)
Driver dia.	1,510 mm (59 in)
Length	12.752 m (41.84 ft)
Loco weight	63,400 kg (62.4 long tons; 69.9 short tons); 66,900 kg (65.8 long tons; 73.7 short tons) after modification
Fuel type	Coal
Cylinders	1 high pressure; 1 low pressure
Valve gear	Walschaerts

Type and origin
Type and origin
Power type	Steam
Builder	Ansaldo
Build date	1905
Total produced	54

FS Class 910
RS Class 400
FS Class 910; RS Class 400
	FS Class 910
Power type
Type and origin
Power type	Steam
Builder	Ansaldo
Build date	1905
Total produced	54
Configuration:;
Specifications
Configuration:;
• Whyte	2-6-2T
Gauge	1,435 mm (4 ft 8+1⁄2 in)
Leading dia.	850 mm (33 in)
Driver dia.	1,510 mm (59 in)
Length	12.752 m (41.84 ft)
Loco weight	63,400 kg (62.4 long tons; 69.9 short tons); 66,900 kg (65.8 long tons; 73.7 short tons) after modification
Fuel type	Coal
Cylinders	1 high pressure; 1 low pressure
Valve gear	Walschaerts
Maximum speed
Performance figures
Maximum speed	75 km/h (47 mph)
Power output	690 CV (510 kW; 680 hp)

FS Class 910 were 2-6-2 tank locomotives designed by Guglielmo Cappa for Rete Sicula where they were registered as RS Class 400. They were absorbed by Italian State Railways (FS) in 1905 and became FS Class 910.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.