.32 H&R Magnum

The .32 H&R Magnum, also known as the .32 Magnum, is a rimmed cartridge designed for use in revolvers. It was developed and introduced in 1984 as a joint venture between Harrington & Richardson and Federal Premium Ammunition.

.32 H&R Magnum
.32 H&R Magnum (left) with a .38 Special (right)
TypeRevolver
Place of originUSA
Production history
DesignerHarrington & Richardson
Federal Premium Ammunition
Designed1984
ManufacturerFederal
Produced1984–present
Specifications
Parent case.32 S&W Long
Case typeRimmed, straight
Bullet diameter.312 in (7.9 mm)
Neck diameter.337 in (8.6 mm)
Base diameter.337 in (8.6 mm)
Rim diameter.375 in (9.5 mm)
Rim thickness.055 in (1.4 mm)
Case length1.075 in (27.3 mm)
Overall length1.350 in (34.3 mm)
Primer typeSmall pistol
Maximum pressure21,000 psi (140 MPa)
Maximum CUP21,000 CUP
Ballistic performance
Bullet mass/type Velocity Energy
77 gr (5 g) Cast LFP 998 ft/s (304 m/s) 170 ft⋅lbf (230 J)
85 gr (6 g) HP 1,263 ft/s (385 m/s) 301 ft⋅lbf (408 J)
90 gr (6 g) LSWC 963 ft/s (294 m/s) 185 ft⋅lbf (251 J)
90 gr (6 g) JHP 1,227 ft/s (374 m/s) 301 ft⋅lbf (408 J)
100 gr (6 g) JHP 1,208 ft/s (368 m/s) 324 ft⋅lbf (439 J)
Source(s): Hodgdon

The .32 Magnum was designed to more than double the speed and energy of the less powerful .32 Smith & Wesson Long cartridge, on which it is based. Loadings for the .32 H&R Magnum even typically exceed hot .38 Special +P loads in terms of both speed and energy. The .32 Magnum also has a higher maximum pressure than the .38 Special.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.