.30 Thompson Center

The .30 Thompson Center (7.62×48 mm), designated 30 THOMPSON CENTER by SAAMI, 30 TC by the C.I.P., is a centerfire rifle cartridge developed for Thompson Center Arms by Hornady intended to deliver .30-06 Springfield performance in a .308 Winchester length round.

.30 Thompson Center
.30 TC (center) compared to .308 Winchester (left) and 6.5mm Creedmoor (right)
Place of originUnited States
Production history
ManufacturerHornady
Produced2007
Specifications
Case typeRimless
Bullet diameter7.62 mm (0.300 in)
Neck diameter8.56 mm (0.337 in)
Shoulder diameter11.78 mm (0.464 in)
Base diameter11.95 mm (0.470 in)
Rim diameter12.01 mm (0.473 in)
Rim thickness1.37 mm (0.054 in)
Case length48.77 mm (1.920 in)
Overall length67.56 mm (2.660 in)
Case capacity3.50 cm3 (54.0 gr H2O)
Rifling twist305 mm (1 in 12")
Maximum pressure (C.I.P.)425.00 MPa (61,641 psi)
Ballistic performance
Bullet mass/type Velocity Energy
150 gr (10 g) SST 3,000 ft/s (910 m/s) 2,997 ft⋅lbf (4,063 J)
165 gr (11 g) SST 2,850 ft/s (870 m/s) 2,975 ft⋅lbf (4,034 J)
Source(s):

The cartridge was initially offered in the Icon series of bolt-action rifles in 2007, which were released at the same time. While ballistic performance was as expected, consumer acceptance was low and the round has not achieved commercial success. The 6.5mm Creedmoor cartridge was created by necking down the .30 Thompson Center, and has achieved widespread popularity.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.